namei | Freshlite EW Series Application Guide

Waterborne anticorrosive coatings, as an important branch of industrial coatings, are mainly used for general substrate protection scenarios. The Freshlite EW Series is designed specifically for light-duty anticorrosion in waterborne industrial coatings and is a benchmark product among colorants dedicated to high water-resistance light-duty anticorrosion.

 

Waterborne anticorrosive coatings, as an important branch of industrial coatings, are mainly used for general substrate protection scenarios, including anticorrosive coating of metal substrates such as guardrails, storage tanks, and steel pipes. The Freshlite EW Series is designed specifically for light-duty anticorrosion in waterborne industrial coatings and is a benchmark product among colorants dedicated to high water-resistance light-duty anticorrosion.

 

Freshlite EW Series products are resin-free waterborne pigment preparations, carefully developed using cutting-edge technology, made from selected high-quality raw materials and manufactured with industry-leading dispersion and milling equipment. The series is resin-free and offers excellent compatibility, suitable for one-component acrylic, waterborne alkyd, waterborne epoxy ester and other systems, with a wide range of applications.

 

The Freshlite EW Series is just one direction within namei’ product matrix. The brand also offers WD Series (high-concentration architectural waterborne), CA Series (waterborne inks), EI Series (waterborne industrial coatings), ET Series (transparent waterborne), PVC Series (plasticizer dispersion) and other product lines, covering the coloring needs of various waterborne polymer systems.

 

Waterborne epoxy ester coatings are industrial coatings that use epoxy ester resin as the binder and water as the dispersion medium, combining the excellent resistance of epoxy coatings with the environmental advantages of waterborne coatings. The Freshlite EW Series is suitable for waterborne epoxy ester systems and is an ideal colorant for waterborne epoxy ester coatings.

 

Waterborne epoxy ester coatings are used in a wide range of applications, including metal anticorrosive coating, storage tank protection, pipeline coatings, and equipment housings. These applications place relatively high demands on the coating’s water resistance, chemical resistance, and weather resistance. The Freshlite EW Series is optimized for these needs and provides reliable coloring solutions.

 

Epoxy ester resin is the product of the reaction between epoxy resin and fatty acids, combining the chemical resistance of epoxy resin with the flexibility of fatty acids. Waterborne epoxy ester coatings have important applications in industrial anticorrosion, especially in outdoor long-term protection scenarios.

 

Advantages of the EW Series in Waterborne Epoxy Ester

 

The advantages of the Freshlite EW Series in waterborne epoxy ester systems are mainly in three aspects: excellent compatibility, resin-free, and outstanding resistance.

 

In terms of compatibility, the EW Series is resin-free and has good compatibility with waterborne epoxy ester resins, solvents and other additives. This provides flexibility for formulation engineers, who can adjust resin amounts in the coating formulation as needed.

 

In terms of being resin-free, the EW Series waterborne pigment preparations contain no resin, avoiding the negative impact of resin on coating performance (such as water resistance and curing speed), maintaining coating performance stability.

 

In terms of resistance, the EW Series offers good weather resistance and chemical corrosion resistance, strong tinting strength, high fluidity, stable properties, and long storage life. These performance characteristics make the EW Series perform excellently in waterborne epoxy ester coatings.

 

Pigment Selection for Waterborne Epoxy Ester Coatings

 

Pigment selection for waterborne epoxy ester coatings should consider: coating type (waterborne epoxy ester clear coat, pigmented coat, etc.), hue requirements, performance requirements, curing process, and cost budget.

 

For outdoor long-term protection applications, it is recommended to use high-performance organic pigments and inorganic pigments from the EW Series: such as Yellow EW2107 (PY.83), Red EW3103 (PR.254), Iron Red EW3105 (PR.101), Violet EW5101 (PV.23), Blue EW6102 (PB.15:3), Green EW8101 (PG.7), etc. These pigments have stable chemical structures and excellent weather and chemical resistance.

 

For indoor short-term protection applications, EW Series products can be flexibly selected according to hue requirements, and azo pigments (Yellow EW2101 PY12, Yellow EW2103 PY.74, Red EW3101 PR.21, etc.) can also be used.

 

Formulation Design for Waterborne Epoxy Ester Coatings

 

Formulation design for waterborne epoxy ester coatings should consider: epoxy ester resin content, pigment content, additive selection, curing agent, and solvent system. Epoxy ester resin content is typically 30%-50%, pigment content is typically 5%-15%, and curing agent is added as needed.

 

As a waterborne pigment preparation, the Freshlite EW Series can be flexibly added to waterborne epoxy ester coating formulations. Formulation engineers should adjust component ratios according to actual needs to ensure coating performance meets standards.

 

The core of formulation design is to “achieve a balance between performance, cost, and application convenience while meeting coating performance requirements.” The Freshlite EW Series offers high pigment content, good compatibility, and excellent fluidity, facilitating formulation design.

 

Application Process for Waterborne Epoxy Ester Coatings

 

The application process for waterborne epoxy ester coatings is similar to that for waterborne acrylic coatings, mainly including surface preparation, coating preparation, application, and curing.

 

Surface preparation: Remove oil, rust, oxide scale, etc. from the substrate surface to ensure the substrate is clean and dry. Methods such as sandblasting, acid pickling, and mechanical grinding can be used.

 

Coating preparation: Prepare the coating according to the formulation ratio, add the calculated amount of Freshlite EW Series colorant, and stir evenly. The prepared coating should be used within 24-72 hours.

 

Application: Methods such as brushing, roller coating, and spraying can be used. Coating thickness is determined according to design requirements, typically 30-100μm.

 

Curing: Room temperature curing or low-temperature baking curing, with curing time determined by temperature and curing agent. Fully cured coatings offer excellent water resistance, chemical resistance, and weather resistance.

 

### Common Problems and Solutions

 

Problem 1: Incomplete coating curing. Cause: Insufficient curing agent or too low temperature. Solution: Appropriately increase curing agent amount; increase curing temperature.

 

Problem 2: Pinholes in the coating. Cause: Insufficient defoaming or improper application process. Solution: Strengthen defoaming; adjust application process.

 

The Freshlite EW Series has a relatively tolerant application window for waterborne epoxy ester coatings. Even at low temperatures of 10-15°C, the EW Series maintains good application convenience; however, curing time will be appropriately extended.

 

A common on-site problem in waterborne epoxy ester coating application is coating tackiness. This usually occurs in high-humidity environments where water evaporation is slow and the coating does not fully cure for a long time. The solution is to improve ventilation conditions, use dehumidification equipment when necessary, or adjust the solvent ratio in the coating formulation.

 

Problem 3: Coating water resistance does not meet standards. Cause: Improper pigment selection or unreasonable formulation design. Solution: Select high-performance EW Series products; optimize formulation design.

 

Problem 4: Poor coating adhesion. Cause: Insufficient surface preparation or improper primer selection. Solution: Strengthen surface preparation; select an appropriate primer.

 

The compatibility of the EW Series with waterborne epoxy ester resins is reflected at multiple levels: from viscosity stability, the prepared pigmented coating shows no obvious stratification after standing for 24 hours; from color stability, hue change after long-term storage is ΔE≤1; from application performance, spraying, brushing, and roller coating all maintain good fluidity.

 

Storage temperature affects the stability of waterborne epoxy ester coatings. Storage temperature is recommended at 5-35°C, avoiding direct sunlight. Under low winter temperatures, some waterborne epoxy ester coatings may show increased viscosity and need to be stirred evenly before use. Under high summer temperatures, some coatings may show decreased viscosity and require appropriate adjustment of solvent ratio.

 

Summary

 

Waterborne epoxy ester coatings are an important branch of waterborne anticorrosive coatings and have special requirements for colorants. The Freshlite EW Series is resin-free and has good compatibility with waterborne epoxy ester resins, curing agents, solvents and other additives, meeting the coloring needs of waterborne epoxy ester coatings and making it an ideal colorant for waterborne epoxy ester coatings.

 

As a mature product of namei, the Freshlite EW Series has been applied by multiple waterborne anticorrosive coating companies domestically and internationally, with stable and reliable results. Users experiencing issues during use can contact the manufacturer’s technical support.

 

Frequently Asked Questions (FAQ)

 

Q1. What to use for coloring waterborne epoxy ester?

 

A: The Freshlite EW Series is recommended. This series is resin-free and suitable for waterborne epoxy ester systems with good compatibility.

 

Q2. What are the advantages of the EW Series in waterborne epoxy ester?

 

A: Excellent compatibility, resin-free, and outstanding resistance. The EW Series has minimal impact on coating water resistance, maintaining long-term coating stability.

 

Q3. What is the compatibility of the EW Series with waterborne epoxy ester?

 

A: The EW Series has good compatibility with waterborne epoxy ester resins, curing agents, solvents and other additives, offering formulation flexibility.

 

Q4. Pigment selection for waterborne epoxy ester coatings?

 

A: High-performance organic pigments and inorganic pigments from the EW Series are recommended, such as EW2107, EW3103, EW3105, etc.

 

Q5. Application precautions for waterborne epoxy ester coatings?

 

A: Proper substrate surface preparation, coating preparation according to formulation, application according to process, and curing as required.

Waterborne Pigments、Waterborne Colorant、Waterborne Pigment Dispersion、Color Paste、Pigment Paste、Water-Based Color Paste、Colorant Paste、Paste Coloring、Colorant Processing、Pigment Preparation、Colorant Blending、Pigment Dispersion、Colorant Preparation、Colorant Mixing、Water-Based Pigment dispersion、Water-Based Color Paste、liquid Color Paste、liquid  Color Paste、liquid Colorant